/ / Engine On-vehicle inspection • Inspect engine coolant • Inspect engine oil • Inspect battery • Inspect air cleaner filter element subassembly • Remove the air cleaner cap. • Remove the air filter element. Visual Pinball 8 1 Exemption on this page. • Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter.

Toyota 2az Fe Engine Manual Engine mechanical ± engine assembly (2az±fe shinnycouk, 1404r±02 cg tc a51075 a52004 engine mechanical ± engine. ENGINE MECHANICAL ± ENGINE ASSEMBLY (2AZ±FE) 14±3 Author: Date: 1525 2002 CAMRY REPAIR MANUAL (RM881U) (3) While cranking the engine, measure the compres. Collection of free car service manuals. 2AZ-FE Engine Mechanical service manual download page File info. Click here to DOWNLOAD Toyota Camry 2AZ-FE Engine.

• Inspect spark plug • Inspect fan and generator v belt Hint: You do not need to check the belt deflection because the auto tensioner has been adopted. • Inspect ignition timing Notice: • Turn all the electrical systems and the a/c off. • Inspect the ignition timing with the cooling fan off. • When checking the ignition timing, shift the transmission to the neutral position.

• Warm up and stop the engine. • When using intelligent tester: • Connect the intelligent tester to the dlc3. Pivot Stickfigure Animator 3.

• Allow the engine to idle. • Select the following menu items: diagnosis / enhanced obd ii / data list / primary / ign advance. • Read ign advance to check the ignition timing. Standard ignition timing: 5 to 15° btdc @ idle • check that the ignition timing advances immediately when the engine speed is increased. • Turn the ignition switch off. • Disconnect the intelligent tester from the dlc3.

• When not using intelligent tester: • Remove the no. 1 Engine cover (see page em- 22). • Open the ignition cover located to the right of the no. 4 Ignition coil. • Pull out the wire harness from the ig cover. • Connect a timing light to the wire harness. Notice: Use a timing light that detects the first signal.

• Using sst, connect terminals 13 (tc) and 4 (cg) of the dlc3. Sst 0 • Allow the engine to idle and check the ignition timing. Bomb The Suburbs Pdf Reader.

Standard ignition timing: 8 to 12° btdc @ idle Hint: Run the engine at 1,000 to 1,300 rpm for 5 seconds, then check that the engine speed returns to the idling speed. • Remove sst from the dlc3.